Accelerating the global innovation community


 

Full Program

Monday, November 15
7:00Registration
8:30TechConnect Europe - Keynotes
10:00Coffee Break
10:30TechConnect Europe - Keynotes
12:00Innovation Expo Opening & Networking Lunch
13:00Characterization of Advanced Materials
13:00Battery and Grid Technology
13:00Biotech Imaging, Analysis & Data Handling
14:25Drug Discovery
13:00Crowdhelix Member Meeting
13:00Innovation Spotlight Pitches: Advanced Materials
13:00Innovation Spotlight Pitches: Energy & Sustainability
16:00Innovation Expo & Poster Reception I
16:00Advanced Materials - Posters I
16:00Energy & Sustainability - Posters I
16:00Biotech & Medical - Posters I
16:00AI for Materials - Posters I
Tuesday, November 16
7:00Registration
8:30TechConnect Europe - Keynotes
10:00Coffee Break
10:15Sensor Technologies
10:15Bio-based Technologies for Sustainability
10:15AI for Materials Discovery
10:15Crowdhelix Member Meeting
10:15Big Science Facilities Summit: Pan-European Facilities for Industry Research I
10:15Innovation Spotlight Pitches: Biotech & Healthcare
12:15Innovation Expo & Networking Lunch
12:15Big Science Lunch Workshop I: Accelerating Innovation through Europe's Research Facilities: Access, funding, expertise and more
12:15Big Science Lunch Workshop II: Bridging Research with Industry: engaging through intermediary service providers
12:15Big Science Lunch Workshop III: Best Practices for Europe's Big Science Facilities: Logistics, analysis, data handling and more
13:30Quantum Technologies
13:30Renewable Energy
13:30Microfluidics, Nano-particles & Exosomes
13:30Enterprise Europe Network - Nano/Micro
13:30Big Science Facilities Summit: Pan-European Facilities for Industry Research II
15:30Big Science Facilities Summit: Case Studies
13:30Cleantech Capital Day
16:00Innovation Expo & Poster Reception II
16:00Advanced Materials - Posters II
16:00Energy & Sustainability - Posters II
16:00Biotech & Medical - Posters II
16:00AI for Materials - Posters II
16:00Innovation Commercialization - Posters II
Wednesday, November 17
9:00Nanomaterials
9:00Materials for Energy & Sustainability
9:00Novel Technologies for Medical Applications, Diagnostics & Treatments
9:00Innovation Pitches: Advanced Materials
9:00Cleantech Capital Day
9:00HealthTech @ Medicon Valley Alliance 2021: Commercialization in Europe
9:05HealthTech, Innovation and Medicon Valley – Perspectives from tech and pharma
9:45Routes to commercialisation and growth – Inspiration from successful Medicon Valley healthtech companies
11:00Health Technology Assessment and market access – National frameworks and experiences
12:00Lunch - on your own in Malmö
12:00Skåne Science & Tech Tours: MAX IV Synchrotron - European Spallation Source - NanoLund & Lund University (details to-be-announced)
16:00After-Tour, After-Science, After-Work (Ah-Veh) Informal Closing Receptions - Malmö & Lund
Monday, November 15
7:00RegistrationLivingroom Reception
8:30TechConnect Europe - KeynotesHigh Live 1
Session chair(s): Gezim Kiseri, Invest in Skåne, SE; Matthew Laudon, TechConnect, US
Welcome to Sweden
G. Kiseri, Invest in Skåne, SE
Welcome to TechConnect Europe
L. Samuelson, Lund University , SE
R. Andrén, Swedish Energy Agency, SE
J-E. Sundgren, SwedeNanotech, SE
H. Riel, IBM, CH
10:00Coffee BreakKanalfoajen
10:30TechConnect Europe - KeynotesHigh Live 1
Session chair(s): Dalia Yablon, TechConnect, US; Gezim Kiseri, Invest in Skåne, SE
K. Edström, Uppsala University, SE
M. Carmo, Jülich Research Institute, DE
12:00Innovation Expo Opening & Networking LunchHigh Live 2-4
13:00Characterization of Advanced MaterialsLive 1
Session chair(s): Håkan Pettersson, Halmstad University, SE
Three-Dimensional Imaging of Nanomaterials in an Electron Microscope
S. Bals, University of Antwerp, BE
Ultrafast Acoustics: The Preferred Tool for Nanoscale Characterization
P.-A. Mante, Lund University, SE
EASI-STRESS - European Activity for Standardisation of Industrial residual STRESS characterisation
M. Thiry, N. Zangenberg, Helmholtz-Zentrum Hereon, Danish Technological Institut, DE
Shining synchrotron X-rays on to materials for innovation
E P Mitchell, European Synchrotron, FR
Porosimetry of nano-pores in polymers and characterization of atomistic defects in semiconductors by positron annihilation lifetime spectroscopy
Gerd Datzmann, Marcel Dickmann, Ricardo Helm, Werner Egger, Johannes Mitteneder, and Günther Dollinger, Datzmann interact & innovate, DE
Femtosecond Laser on a Chip - FEMTOCHIP
Thomas Schwarzbaeck, EurA AG, DE
An optical characterization method for determination of dynamic properties of smart hydrogels
K. Rueckmann, G. Mu, H.-Y. Leu, J. Magda, F. Solzbacher, C. F. Reiche, J. Koerner, Leibniz University Hannover, DE
Accoustic Levitation of protein crystals
P. Docker, V. Baker G. Leen, M. Ward, P. Aller, D. Axford, Diamond Light Source, UK
A Catalyst Analysis Service that Uses Big Science Facilities
S.Cooper, Danish Technological Institute, DK
13:00Battery and Grid TechnologyLive 2
Session chair(s): Mark Kozdras, Mission Innovation, Natural Resources Canada, CA; Holger Ihssen, Helmholtz Association, BE
Advanced Materials for Energy and Mobility: The backbone towards Net-Zero
P. Jacques, EMIRI, BE
TBD
T. Vegge, DTU, DK
Non-destructive localization and quantification of Lithium in commercial prismatic Li-ion battery
V. Baran, M. J. Mühlbauer, A. Schökel, J. Pfanzelt, A. Senyshyn, M. Etter, DESY, DE
Elimination of polymers and solvents in LIB anodes by assembling nanomaterials suspended in gas
J.J. Vilatela, IMDEA Materials, ES
Move over, vehicles: Autonomous Buildings will change the way we use, trade, and distribute energy in the smart cities of the future
Troy Harvey, PassiveLogic, US
The use of low-pressure cold spray-formed Cu–Al2O3 MMC coatings to improve the surface properties of the electrical connectors.
Volf Leshchynsky, IDIR, CA
Accurate Pole Testing can increase Resilience of Power Supply Grid and save billions of Euros at the same time
K. Deuar, Kris Deuar & Associates, Inc., US
Transforming how we energize the world: An overview of General Fusion
Robert Bergqvist, General Fusion, CA
13:00Biotech Imaging, Analysis & Data HandlingLive 3
Session chair(s): Kajsa Paulsson, Lund University, SE
Advancing renal imaging biomarkers
A. Schmidt-Christensen, Lund University, SE
Characterizing Structures in 3D – with and without Machine Learning
A. B. Dahl, DTU, DK
Connecting the dots: Capabilities, possibilities, and opportunities for life science research in the federated compute landscape
A. Sjöström, LUNARC, SE
14:25Drug DiscoveryLive 3
Session chair(s): Ulrika Bäckman, EATRIS, SE
Targeting protein-protein interactions involved in oxidative stress using fragment-based drug discovery
A. Bach, University of Copenhagen, DK
High-throughput crystallography Beamline P11 at PETRA III featuring biomedical research related to COVID-19
E. Crosas, S. Saouane, J. Meyer, B. Kistner, and J. Hakanpää, Deutsches Elektronen-Synchrotron DESY, DE
TBD
O. Thastrup, 2cureX, DK
Development of Ionic liquid PCL-PLA microspheres hybrid system for pulmonary delivery of zafirlukast.
Namrata Hagawane, Amelia M. Avachat, Sinhgad College of Pharmacy, Vadgaon, Pune, IN
Development of Biogenic Gas Vesicles as Multifunctional Theranostic Carriers for Enhanced Cancer Therapy
Lei SUN, The Hong Kong Polytechnic University, HK
13:00Crowdhelix Member MeetingHigh Live 1
13:00Innovation Spotlight Pitches: Advanced MaterialsLive 4-5
13:00Innovation Spotlight Pitches: Energy & Sustainability Live 6-7
16:00Innovation Expo & Poster Reception IHigh Live 2-4
16:00Advanced Materials - Posters IHigh Live 2-4
Multifunctional coatings, improving both product life time and optical attributes in one single process.
Albin Johansson, HPViCo AB, SE
Fabrication of silicon and iron oxide modified carbon nanotubes - polystyrene composite for engineering fire retardant-textile products
N. Ahamad, S. Ahamed, M. Alam, Al-Mamun and H. Fairbrother, Shahjalal University of Science and Technology, BD
A novel bio-inspired omni-directional underwater robot
Dr. Xingjian JING, The Hong Kong Polytechnic University, HK
HF-free facile and rapid synthesis of MXenes related materials and their efficient energy conversion and storage applications
Jianhua Hao (Presenter) and Pang Sin Yi, The Hong Kong Polytechnic University, HK
Precipitation and structural hardening of AlMgSiCu alloys
T. Abid , K. Belhouchet , Boubertakh , S. Zidani, Université de M'sila, DZ
Surface engineering of composite membranes and controlling porosity
C. N. Murthy, The Maharaja Sayajirao University of Baroda, IN
Preparation of multiply positively charged substances usable for stable modification of negatively charged solid materials
J. Jindřich, P. Kasal, Charles University, Faculty of Science, CZ
Waterloo Institute for Nanotechnology (WIN): Solving global challenges by bridging across the length scales
Sushanta Mitra, Waterloo Institute for Nanotechnology, CA
Rapid Solid-State Sinter-Bonding Technique in Air Using Cu Dendritic Particles
Eun Byeol Choi and Jong-Hyun Lee, Seoul National Uiversity of Science and Technology, KR
Packing for ultra thin and small silicon bare die
Mickael Pommier, Samuel Yon, Laurent Dubos, MURATA, FR
Materials Informatics: The Time for Adoption is Now
R A Collins, PhD, IDTechEx, US
Effect of Cold Deformation on Microstructure and Drawability of Medium Carbon Steel Wires
T. Abid , M.Chaouki ,Nebbar, S. Zidani, Faculty of technology, DZ
Improved hybrid membranes for CO2 separation with aligned nanostructures
L. Sørvik, L. Ansaloni, M.T. Guzman Gutierrez, L. Deng, T.A. Peters, H. Hemmen, CondAlign AS, NO
Microfluidics Meets Ultrafast Spectroscopy: Lab-on-Chip Approach for Artificial Light Harvesting
M.S. Pshenichnikov, B. Kriete, Zernike Institute for Advanced Materials, University of Groningen,, NL
Nanozirconia for refractive index enhancement
N. Reinhardt, A. Venier, M. Comesana-Hermo, E. Camposilvan, J. Alberici, Mathym SAS, FR
Carbon nanotube thin film deposition on hollow fiber membranes: addressing the scalability challenges of conductive membranes
M. Larocque, D. Latulippe, C. de Lannoy, McMaster University, CA
Nanoparticle Composite Membranes: Versatile Materials for Future MEMS/NEMS Sensors and Actuators
H. Schlicke, S. Kunze, H. Hartmann, T. Vossmeyer, Fraunhofer CAN, DE
16:00Energy & Sustainability - Posters IHigh Live 2-4
Ultraprecise Deposition of Nanoparticle-Based Inks for Printed and Flexible Electronics
Aneta Wiatrowska, Piotr Kowalczewski, Karolina Fiączyk, Łukasz Witczak, Jolanta Gadzalińska, Mateusz Łysień, Ludovic Schneider, Filip Granek, XTPL SA, PL
In Operando Diffraction Tomography – Looking inside a Li-Ion Battery
A. Schökel, V. Baran, D. Petz and A. Senyshyn, DESY, DE
New materials for eliminating microplastics
Muhammad Rabnawaz, Michigan State University, US
Potentials of Compressed Air Energy storage in Coastal Regions
Ali Reza Jahangiri and Meisam Mohammadi-Amin, ARI Research Institute, IR
Short-term forecast of electricity demand in Greece
Ioannis Engonopoulos, National Technical University of Athens, GR
Testing business concepts for autonomous electrically driven busses in public transportation
Harald Eifert, Ralph Hirschberg, EurA AG, DE
Blockchain-based Internal Carbon Pricing for Corporate Sustainability
Ahmad Karnama, Ween Energy AB, SE
Visionary Solutions for Future Cities : The VARCITIES project approach
Dionysia Kolokotsa, Elisavet Tsekeri, Katerina Lilli, Konstantinos Gobakis, Abdul Rahim, Andreea Petrea, Raffaele Cavalli, Stefan Haenen, Michiel Dewagtere, Technical University of Crete, GR
Adaptive path replanning and online layer height control through deposition arc current for gas metal arc based additive manufacturing
A. Ščetinec, D. Klobčar, D. Bračun , University of Ljubljana, Faculty of Mechanical Engineering, SI
Critical Stable Length in Wrinkles of Two-Dimensional Materials
Quoc Huy Thi, Department of Chemistry, City University of Hong Kong, HK
Development of colorful and UV protective cotton fabric through green in situ synthesis of ZnO
Anja Verbič, University of Ljubljana, Faculty of Natural Sciences and Engineering, SI
Electrospun Nanofiber Scaffolds for Anterior Cruciate Ligament Reconstruction: Effect of Draw Ratio on Enzymatic Degradation Rate
David Anthony Brennan, Rowan University, US
16:00Biotech & Medical - Posters IHigh Live 2-4
Emphasizing the Methods for Separation and Analysis of a Lactobacillus Biomass, Used as a Component of a Probiotic Preparation Obtained on Media with Pollen and Honey
Ana Despina Ionescu, National Institute for Chemical-Pharmaceutical Research and Development- ICCF, Bucharest, RO
PolyUStimulator - Ultrasound Driven Piezoelectric Stimulator for Neuromusculoskeletal Rehabilitation
Monzurul Alam (Presenter), Shuai Li, and Yong-Ping Zheng, The Hong Kong Polytechnic University, HK
Biomimicking Photocrosslinkable Nanocomposite Bone Graft
Dr. Xin ZHAO, The Hong Kong Polytechnic University, HK
Data storage using peptide sequences
Dr. Zhong-Ping Yao, The Hong Kong Polytechnic University, HK
Advanced in vitro management of three-dimensional cell cultures and explanted tissue
Sebastian Kreß, Dominik Egger and Cornelia Kasper, University of Natural Resources and Life Sciences, Vienna, AT
Change in willingness to undergo joint surgery after completion of a digital management program for hip and knee osteoarthritis: A 6-month follow-up study
H Nero, LS Lohmander, LE Dahlberg, Joint Academy, SE
D-glucose recognition by phenylboronic acid functionalized POSS fluorescence probe
K.O. KIM, Dankook University, KR
Thermophysical analysis of extruded biodegradable polylactic acid for the additive manufacturing of bone tissue engineering scaffolds
Sarathkumar L, Bharath S, Vinothkumar P, Soundarapandian S, IIT Madras, IN
16:00AI for Materials - Posters IHigh Live 2-4
Metal cutting, a new approach based on molecular dynamics
B. Medina-Clavijo, P. Arrazola, A. Chuvilin, CIC nanoGUNE, ES
Robust and Trustworthy AI for Brain Tumor Surveillance
Ghulam Rasool, Rowan University, US
Laser Dissimilar Material Quality Assessment by Deep Learning
C. Han, T. Kim and H. Choi, Keimyung University, KR
Tuesday, November 16
7:00RegistrationLivingroom Reception
8:30TechConnect Europe - KeynotesHigh Live 1
Session chair(s): Gezim Kiseri, Invest in Skåne, SE; Matthew Laudon, TechConnect, US
B. Weckhuysen, Sunergy Flagship Initative, NL
TBA, European Spallation Source, SE
M. Larsson, MAX IV Laboratory, SE
M. Browne, Crowdhelix, UK
J-D. Malo, European Innovation Council, BE
10:00Coffee BreakKanalfoajen
10:15Sensor TechnologiesLive 1
Session chair(s): Håkan Pettersson, Halmstad University, SE
TBD
A. Boisen, Technical University of Denmark, DK
Type-II superlattice detectors for compact high performance infrared imaging solutions
L. Höglund, IRnova AB, SE
Design aspects of highly sensitive co-resonantly coupled micro-/nanocantilever systems in sensor applications
J. Koerner, Leibniz University Hannover, DE
Zero-Power Optical Liquid-Crystal-based Toxic Gas and Vapor Sensors
M.E. Prévôt, Kent State University, US
10:15Bio-based Technologies for SustainabilityLive 2
Session chair(s): Mark Kozdras, Mission Innovation, Natural Resources Canada, CA; Holger Ihssen, Helmholtz Association, BE
Applications of microfibrillated and nanofibrillated cellulose: Paper, packaging, paints, boards, tiles, non-wovens and polymer composites
David Skuse, Yun Jin, Jon Phipps, Tom Larson and Sean Ireland, FiberLean Technologies Limited, UK
Graphitic carbon nitride modified with transition metals and graphene for boosting photocatalytic valorization of biomass-derived 5-hydroxymethylfurfural
Paweł Mazierski, University of Gdańsk, PL
Hydrogen and syngas production from hybrid filtration combustion
M. Toledo, Federico Santa María Technical University, CL
10:15AI for Materials DiscoveryLive 3
Session chair(s): Peter Schüffelgen, Jülich Research Institute, DE
Data-driven Materials Design as a Service: From physical properties to sustainability
J. Vieten, F. Call, M. Roeb, C. Sattler, ExoMatter, DE
A Cognitive-based Data Analytics Framework for Accelerated Discovery of CO2 Reduction Catalysts
Ali Malek, Qianpu Wang, Michael Eikerling, Kourosh Malek, NRC Energy, Mining and Environment (EME), 4250 Wesbrook Mall, Vancouver, BC, V6T 1W5, Canada; Institute of Energy and Climate Research, Forschungszentrum Jülich, 52425 Jülich, Germany, CA
Accelerated Materials Innovation Through Machine-Learning Assisted Atomistic Modeling
T.P.M. Goumans, Z. Hu, R. Rueger, A.S. Rustenburg D. Sheberla, C. Kreisbeck, Software for Chemistry & Materials, NL
SIMAGORA, a platform for Integrated Digital Technologies for Materials and Product Development
Xenophon Krokidis and Andreas Bick, Scienomics SAS, FR
Large scale computing platform for start-ups and research institutions
Athanasios Papaioannou & Dr. Harald Eifert, EurA AG, DE
Digital production Artificial intelligence for process performance improvement and sustainability in the production processes for coating, printing and laminating
Thomas Kolbusch, Coatema, DE
10:15Crowdhelix Member MeetingHigh Live 1
10:15Big Science Facilities Summit: Pan-European Facilities for Industry Research ILive 4-5
Session chair(s): Kajsa Paulsson, Lund University, SE
Anne Charlotte Joubert , European Network of Research Infrastructures and Industry for Collaboration (ENRIITC), ES
Ed Mitchell, European Synchrotron (ESRF), FR
Caroline Boudou, Institut Laue Langevin (ILL), FR
Aleš Hála, Extreme Light Infrastructure (ELI) Beamlines, CZ
10:15Innovation Spotlight Pitches: Biotech & HealthcareLive 6-7
12:15Innovation Expo & Networking LunchHigh Live 2-4
12:15Big Science Lunch Workshop I: Accelerating Innovation through Europe's Research Facilities: Access, funding, expertise and moreLive 1
Session chair(s): Jimmy Binderup Andersen, European Spallation Source (ESS), SE
12:15Big Science Lunch Workshop II: Bridging Research with Industry: engaging through intermediary service providersLive 2
12:15Big Science Lunch Workshop III: Best Practices for Europe's Big Science Facilities: Logistics, analysis, data handling and moreLive 3
Session chair(s): Kajsa Paulsson & Magnus Larsson, Lund University, SE
13:30Quantum TechnologiesLive 1
Session chair(s): Håkan Pettersson, Halmstad University, SE
TBD
C. Marcus (Keynote), University of Copenhagen, DK
Photonic quantum hardware
Peter Lodahl, Niels Bohr Institutet, Københavns Universitet, DK
Exploring the full potential of edge channel transport in HgTe based two-dimensional topological insulators
S. Shamim, University of Wurzburg, DE
Nanomaterials for quantum technologies
H. Potts, S. Lehmann, C. Thelander, Lund University, SE
Molecular Lanthanide Complexes for Quantum Technologies
Stergios Piligkos et al., University of Copenhagen, DK
Bolometry - The art of detecting radiation with thermometer
R. Kokkoniemi, IQM Finland, FI
TBD
R. Warburton, University of Basel, CH
13:30Renewable EnergyLive 2
Session chair(s): Mark Kozdras, Mission Innovation, Natural Resources Canada, CA; Holger Ihssen, Helmholtz Association, BE
Accelerating the development of printed solar cells with artificial intelligence and automation
J. Hauch, Julich Research Institute, DE
High efficiency inkjet printed OPV modules for indoor applications
Florence Archet, Donia Fredj, Hasan Alkhatib, Marie Parmentier, Enora Arche, Brice Cruchon, Eric Faupin, Sadok Ben Dkhil*, Dracula Technologies, FR
Deep Learning for Fast Organic Energy Materials Screening
Gareth Moore, Femtomat Group, University of Bern, CH
TBD
C. Eggert, BAM, DE
Screening of materials for thermoelectric conversion of heat into electricity
O.M. Lovvik, SINTEF Sustainable Energy Technology, NO
TBD
K. Eckert, Technical University of Dresden, DE
13:30Microfluidics, Nano-particles & ExosomesLive 3
Session chair(s): Kajsa Paulsson, Lund University, SE
TBD
C. Adiels, Lund University, SE
Microfluidic Sample Preparation of high MW DNA for Genomic Analysis
O. E. Ström, J. P. Beech, J. O. Tegenfeldt, Lund University, SE
The Separation and Identification of Parasite Eggs from Horse Feces
Jason P. Beech, Eva Tydén, and Jonas O. Tegenfeldt, Lund University, SE
Measuring the size and surface charge of exosomes with a salt gradient in a nanochannel
Martin K. Rasmussen, Jonas N. Pedersen, Rodolphe Marie, Technical University of Denmark, DK
Electrokinetic Deterministic Lateral Displacement devices for separation of nano extracellular vesicles
Bao Dang Ho, Department of Physics, Lund University, SE
High-resolution identification of bacteria and their plasmids using optical DNA mapping
F. Westerlund, Chalmers University of Technology, SE
13:30Enterprise Europe Network - Nano/MicroLive 6-7
13:30Big Science Facilities Summit: Pan-European Facilities for Industry Research IILive 4-5
Session chair(s): Jimmy Binderup Andersen, European Spallation Source (ESS), SE
Report Out - Big Science Workshops
Jimmy Binderup Andersen, European Spallation Source (ESS), SE
Martina Bauer, Gesellschaft für Schwerionenforschung (GSI) Helmholtz Centre for Heavy Ion Research, DE
Antonio Bonucci, European X-Ray Free-Electron Laser Facility (European XFEL), DE
Sonia Utermann, Facility for Antiproton and Ion Research in Europe (FAIR), DE
Sabine Brock, Deutsches Elektronen-Synchrotron (DESY), SE
15:30Big Science Facilities Summit: Case StudiesLive 4-5
Helen Sjögren, Ferring Pharmaceuticals, SE
Simon Jacques, Finden, UK
13:30Cleantech Capital DayHigh Live 1
16:00Innovation Expo & Poster Reception IIHigh Live 2-4
16:00Advanced Materials - Posters IIHigh Live 2-4
Preparation and characterization of cellulose nanofibers baesd air nanofilters
Hamidreza Pirayesh, Mostafa Nikkhah Dafchahi, Hossein Khanjanzadeh, Kyungpook national universiy, KR
Electrochemical Deposition and Structural Study of Co-Cu-Fe-Mn-Ni High Entropy Alloy Thin Films
M. Burada, M. T. Olaru, L. Licu, A. C. Matei, N. Zarnescu-Ivan, V. Dragut, A. M. J. Popescu, V. Constantin, National R&D Institute for Non-ferrous and Rare Metals – IMNR, RO
Invisible anti-counterfeiting nanomaterials with visible emission activated by UV and NIR radiation
A. Szczeszak, D. Przybylska, N. Kaczorowska, M. Skwierczyńska, T. Grzyb, M.Runowski, E. Śmiechowicz, A. Erdman, P. Kulpiński, K. Olejnik, Adam Mickiewicz University, Poznan, PL
Free standing graphene: technology, high-quality control, observation of new phenomena
Eugen Sheregii, University of Rzeszow, PL
pH Sensitive Uni-Molecular Polymeric Nano-Hollow Micelles/ Vesicles
S. Al-Ghenaimi, M. Changez, A Sharqiyah University, OM
High velocity atmospheric plasma sprayer
Yuri Chivel, MerPhotonics, FR
Laser Cladding with Conical Beams
Yuri Chivel, MerPhotonics, FR
Use of silica nanoparticles “prepared by sol-gel method and well dispersed by sonication” in production of greener recycled aggregate concrete
Aref M. al-Swaidania, Ibrahim alGhoraibib, Khaled Azzamc, Arab International "Formerly European" University, SY
Preparation of multiply positively charged substances usable for stable modification of negatively charged solid materials
Jindřich Jindřich, Petr Kasal, Charles University, Faculty of Science, CZ
Liquid Crystal Elastomers-based Bio-inks for Responsive Soft Tissue 3D printing
Marianne E Prévôt, Kent State University / Biostica, US
Efficient aerobic oxidation of 2,6-di-tert-butylphenol to diphenoquinone catalyzed by mixed valence copper cyanide 3D-metal organic framework –bicarbonate system.
S. Elkhalafy* ,S. El-din Etaiw , M. Hassanein, Tanta University, EG
Green Synthesis of Copper Oxide Nanoparticles using Justicia Adhatoda Leaf Extract and its Application in Cotton Fibers as Antibacterial Coatings
Md. Monjarul Alam, Islamic University, BD
Perspectives on large technologic applications with revised fundamentals and selective carbon phase transformation.
S.NEUVILLE, TCE creation, FR
Structural properties by simulating the theoretical models of Ag/SiO2/Si thin films grown with rfMS deposition
Petronela. Prepelita , I. Stavarache, F. Garoi, M. Dumitru, B. Sbarcea, V. Craciun, National Institute for Laser, Plasma and Radiation Physics, RO
A Nano and Micro-Sized Materials Characterization Service
S.Cooper, Danish Technological Institute, DK
Polarized-Emitting Quantum Dot LEDs
H. Schlicke, C. Schloen, C.C. Delgadillo, S. Becker, T. Jochum, H. Weller, J. Niehaus, Fraunhofer CAN, DE
Experimental study on conversion of nut residues into added value products for pollutants adsorption
D. Vamvuka, E. Machairas, D. Pentari, Technical University of Crete, GR
Contents and mode of occurrence of lithium in Greek coal fly ash
D. Pentari, D. Vamvouka*, A. Stratakis, E. Vlachaki, M. Fazaki, Technical University of Crete, GR
Disposable face masks - Analysis of the release of synthetic micro and nano particles and chemical contaminants - linked to the COVID-19 pandemic
S. Sarp, Swansea University, College of Engineering, UK
PALMS - Plasma Additive Layer Manufacture Smoothing
T. Brzezinka, J. Housden, N. Laugel, A. Yerokhin, Wallwork Cambridge Ltd, UK
16:00Energy & Sustainability - Posters IIHigh Live 2-4
A HIRF Essay Simulation Methodology for Avionics Applications
H.R.D. Filgueiras, R. Marques, A.R. Augusto, S.H. Nunes, H.L. de Faria, A. Cerqueira Jr., Brazilian National Institute of Telecommunications (Inatel), BR
Mapping Smallholder Rice Farms in Ghana with Satellite Earth Observation Data
E. Salakpi, J. Muthoka, P. Hurley, S. Oliver, P. Rowhani, University Of Sussex, UK
Photo-catalytic Removal of Organic Pollutants from Contaminated Water Under Solar Radiation
O.P. Yadav, CCS Haryana Agricultural University, IN
Soltiles to make your energy for your EV and home affordable, ultra high efficient, affordable and battery
Tom Faust, Soltiles, US
Cost-effective, Clean, and Self-sustainable Power Generation and Complete Utilization of any Renewable Municipal Solid Waste (MSW) or Other Carbonaceous Solid Mixtures
Vladimir, Fluent Matrix NY Corp, US
Systems and Methods for Enhancing the Efficiency of Separation Processes Using Electromagntizm
Emad Alhseinat, Khalifa University, AE
Adverse Impact on Air Quality by inadequate Municipal Solid Waste management
Ramesh Kumar Jalan, UN Office for Information & Communication Technology, IN
A comprehensive review on heat storage materials and thermal conductivity enhancement techniques for solar cooking applications
Ravi Kumar Goyal, Eswaramoorthy, Shri Mata Vaishno Devi University, IN
Photocatalytic water splitting over CeO2/Fe2O3/Ver photocatalysts
K. Kočí, VSB-Technical University of Ostrava, Institute of Environmental Technology, CZ
Rapid prototyping for redox flow batteries and technological scale-up
J. Vrána, J. Pocedič, P. Mazúr, J. Kosek, University of West Bohemia in Pilsen - NTC, CZ
Cobalt spinel supported on open-cell foam for N2O catalytic decomposition
L. Obalová, Institute of Environmental Technology, CEET, VSB-Technical University of Ostrava, CZ
Customized Polymer - Graphite Nanoplates Composites
J. Pothuis, I. Moreno-Villoslada, R. Araya-Hermosilla, EasyGraphene, NL
Aging behavior of 2D-MoS2 grown by H2S-free MOCVD process: the role of graphitic carbon content
A. Ghiami, RWTH Aachen, DE
16:00Biotech & Medical - Posters IIHigh Live 2-4
Posture Training Bodywear for Older Adults with Degenerative Scoliosis
Joanne Yip, The Hong Kong Polytechnic University, HK
Development of Apt-Au nanozyme biosensor for monitoring efficacy of Hodgkin Lymphoma therapy
Maria A. Slyusarenko, Sergey A. Shalaev, Larisa V. Filatova, Dmitriy A. Gorin, Anastasia V. Malek, Federal State Budgetary Institution "National Medical Research Center of Oncology named after N.N.Petrov" of the Ministry of Health of the Russian Federation, RU
Isolation and analysis of prostate-derived extracellular nano-vesicles with poly-Apt-NP is a new approach to stratification of patients with “gray zone” PSA range
L. Zabegina, N. Nikiforova, A. Nosov, S. Reva, A. Malek, Federal State Budgetary Institution "National Medical Research Center of Oncology named after N.N.Petrov" of the Ministry of Health of the Russian Federation, RU
Nuclei segmentation from cellular-resolution optical coherence tomography
Sheng-Lung Huang, NTU, TW
Pharmaceutical Potential of Laboratory Grown Cultures of Blue Green Algae
Ritu Chauhan, Ashutosh Tripathi*,Abhishek Chauhan and Tanu Jindal Amity University, Sector-125, Noida, Uttar Pradesh, Amity Institute of Environmental Sciences, Amity University, Noida, U.P., India, IN
Developing Customizable Scaffolds for Vascular Tissue Regeneration using Low Temperature Plasma (LTP)
Komal Vig, Aundrya Montgomery, Alabama State University, US
A novel fluorescent aptasensor based on aptamer/graphene oxide complex for the detection of sulfamethazine in milk and eggs
Tao Le, College of Life Science, Chongqing Normal University, CN
Visualizing Processes in Energy Storage and Generation Devices
S.Cooper, Danish Technological Institute, DK
Development of safe anticoagulant- a bioactive peptide from Porphyra yezoensis
Alka Mehta, Vellore Institute of Technology, IN
Recent Advances in Hybrid CNC Reinforced Polymeric Nanocomposites.
M.J. Dunlop, B. Acharya, R. Bissessur, University of Prince Edward Island, CA
Tunable Photophysics of Self-Assembled Phe-Phe Dipeptide Doped with Luminescent Compounds
T. Martins, G. Sousa, D. Cordeiro, R. Miranda, Federal University of Goias, BR
16:00AI for Materials - Posters IIHigh Live 2-4
Towards an enhanced interactive AR/VR environment via low cost wireless sensor localization
Ali Reza Jahangiri and Meisam Mohammadi-Amin, ARI Research Institute, IR
GPS-free Navigation Platform for Urban Areas
Ali Reza Jahangiri, Meisam Mohammadi-Amin and Ghasem Kahe, ARI Research Institute, IR
Introducing RydeSAfe - Riding Safely in the NYC Public Transportation System
D. Viderman; R. Parlo, BHTS, US
The development of a clinical decision-support web-based tool for predicting the risk of gastrointestinal cancer in iron deficiency anaemia; the IDIOM App
Orouba Almilaji, Bournemouth University, UK
16:00Innovation Commercialization - Posters IIHigh Live 2-4
Role of technology transfer, innovation strategy and network. A conceptual model of innovation network to facilitate the internationalization process of SMEs
S. Mancini, Universidad Nacional de Educación a Distancia – UNED, ES
Innovation & Commercialisation in Action: The Inlecom Lean Hybrid Model
C. Roupas, V. Albanis, C. Keogh, P. Durkin, P. O’Sullivan, M. Bennett, Inlecom Commercial Pathways, IE
Wednesday, November 17
9:00NanomaterialsLive 1
Session chair(s): Håkan Pettersson, Halmstad University, SE
TBD
H. Linke (Keynote), Lund University, SE
Lightweight and Porous Copper Coated Multifunctional Layer
J. Militký, M. Venkataraman , J. Večerník and M. Petrů, Technical University of Liberec, CZ
Robust ferromagnetism of strained MnAs nanocrystals embedded in wurtzite GaAs nanowire shells
J. Sadowski, A. Kaleta, S. Kret, K. Gas, B. Kurowska, S. Kryvyi, B. Rutkowski, N. Gonzalez Szwacki, M. Sawicki, Linnaeus University, SE
Multi-dimensional quantum materials: From Dots to Rods, Sheets and Giant Shell Particles
S. Krohn, H. Schlicke, T. Jochum, J. Niehaus, Fraunhofer CAN, DE
Dielectric metasurfaces: from ultrathin lenses to microscopic vehicles that can be steered by light
M. Kall, Chalmers University of Technology, SE
A Scaleable Manufacturing Approach for All-Inorganic Diffractive Optics, Lightguide Gratings and Metalenses using Nanoimprint Lithography and High Refractive Index Nanoparticle Inks
V.J. Einck, M. Torfeh, A. McClung, D.E. Jung, M. Mansouree, A. Arbabi, J.J. Watkins, University of Massachusetts, US
Functionalized Icephobic Coatings as Passive Ice Protection Systems
Alessandro Corozzi, Federico Veronesi, Julio Mora, Giulio Boveri and Mariarosa Raimondo, ISTEC-CNR Institute of Science and Technology and Technology for Ceramics - National Research Council (Italy), IT
Selective Laser Melting of Multi-Material Parts
Yuri Chivel, MerPhotonics, FR
TBD
M. Salter, ProNANO
Redefining the make and use of Anisotropic Conductive Films for hybrid and flexible electronics.
M. Lindberget, CondAlign AS, NO
9:00Materials for Energy & Sustainability Live 2
Session chair(s): Mark Kozdras, Mission Innovation, Natural Resources Canada, CA; Holger Ihssen, Helmholtz Association, BE
TBD
M. Eikerling, Julich Research Institute, DE
Reactive Metals as Energy Storage and Carrier Media: Use of Aluminum for Power Generation in Fuel Cell-Based Power Plants for the metal to power phase
L. Barelli, M. Baumann, G. Bidini, P. A. Ottaviano, R.V. Schneider, S. Passerini, L. Trombetti, University of Perugia, IT
Building Thermal Energy Storage Using Phase Change Materials
Muhammad Mustafizur Rahman, Wichita State University, US
Advantages of active techniques in the storage and use of thermal energy
Alberto Egea, Ruth Herrero-Martín, Alberto García, José Pérez-García, Polytechnic University of Cartagena, ES
Automating the screening of small molecules for grid-scale energy storage
S. Er, DIFFER/CCER, NL
TBD
H. Tribukait (Keynote), Atinary Technologies, CH
Digital materials discovery for energy efficiency and sustainability with SIMAGORA
Xenophon Krokidis and Andreas Bick, Scienomics SAS, FR
Safe and sustainable design of advanced materials: TNO Case
Neeraj Shandilya, TNO, NL
9:00Novel Technologies for Medical Applications, Diagnostics & TreatmentsLive 4-5
Session chair(s): Ulrika Bäckman, EATRIS, SE
TBD
C. Prinz (Keynote), Lund University, SE
The future of breast imaging in screening and diagnostics
S. Zackrisson, Lund University, SE
Can A Glove-Coach Technology significantly increase the Efficacy of Cardiopulmonary Resuscitation on non-healthcare professionals? A controlled trial.
Andrea Glotta, RN, Clinica Luganese Moncucco, CH
Saliva as a reliable sample type for mass SARS-CoV-2 testing strategies
Anne Wyllie, Yale School of Public Health, US
Research Innovation and Route to Market of a CoVID-19 Testing Device: Lessons Learned from Acceleration and New Ways of Working
Michael Joseph Paratharayil, Brunel University London, UK
Fluorescent organic compounds for photodynamic treatment of cancer and bacterial infections
G. Varvuolytė, N. Kleizienė, E. Arbačiauskienė, A. Bieliauskas, A. Šačkus, L. Malina, B. Hošíková, H. Kolářová, V. Kryštof, A. Žukauskaitė, Kaunas University of Technology, LT
9:00Innovation Pitches: Advanced MaterialsLive 6-7
9:00Cleantech Capital DayHigh Live 1
9:00HealthTech @ Medicon Valley Alliance 2021: Commercialization in EuropeLive 3
Session chair(s): Sarah Lidé, Medicon Valley Alliance, SE
Welcome from the organizers: Medicon Valley Alliance, Copenhagen Capacity, Invest in Skåne
Sarah Lidé, Medicon Valley Alliance, SE
9:05HealthTech, Innovation and Medicon Valley – Perspectives from tech and pharmaLive 3
Session chair(s): Christer Månsson, Invest in Skåne, SE
From blood to bytes, why pharma is going digital
Wilhelm Gatenbeck, Roche, SE
Nordic business perspectives and HealthTech – Insights from a global tech company
Heidi Mills, Bosch, DK
9:45Routes to commercialisation and growth – Inspiration from successful Medicon Valley healthtech companiesLive 3
Session chair(s): Sarah Lidé, Medicon Valley Alliance, SE
Gaining customers in Denmark for their mHealth solution that optimises the treatment of mental disorders
Thomas Lethenborg, Monsenso, DK
How to succeed in making deals with the Swedish public sector
Patrik Borneson, Medilevel, SE
Gaining customers in Denmark and Sweden for an AI solution which helps identify potential cardiac arrest patients in 911-calls
Andreas Cleve, Corti, DK
11:00Health Technology Assessment and market access – National frameworks and experiencesLive 3
Session chair(s): Niels Christian Ganderup, Copenhagen Capacity, DK
Digital Health Applications (DiGa) – Retrospective views and learning
TBC, Health Innovation Hub Germany, DE
Perspectives on reimbursement of healthtech and digital health in Denmark
Kristian Kidholm, Center for Innovative Medical Technologies, Odense University Hospital & University of Southern Denmark, DK
Perspectives from Sweden
TBC, Medicon Valley Alliance, SE
12:00Lunch - on your own in MalmöMalmö
12:00Skåne Science & Tech Tours: MAX IV Synchrotron - European Spallation Source - NanoLund & Lund University (details to-be-announced)Skåne Region
16:00After-Tour, After-Science, After-Work (Ah-Veh) Informal Closing Receptions - Malmö & LundMalmö & Lund
 

© Copyright 2021 TechConnect. All Rights Reserved. Disclaimer | Privacy Policy | Terms of Use

Produced by:

TechConnect

In Partnership with:

TechConnect Ventures